Transform your welding experience with our high quality, durable, versatile, and thoughtfully-designed welding products. Whether you're in need of a single welding product, or a full welding skid setup, you cannot go wrong with AlumaReel USA.
Showing all 5 resultsSorted by popularity
-
Skid Mount Rails
$400.00SHIPPING NOT INCLUDED IN PRICE FOR THIS ITEM — (Sold as a pair, 2 rails total)
Call for price with shipping, or we will contact you with current freight shipping rates after purchase.
Comes standard with every AlumaReel USA welding skid purchase. (Sold as a pair, 2 rails total)
Typically purchased as an extra item to mount skids in multiple vehicles, trailers, or to make mobile shop dolly.
These are the rails used to mount all skid systems into or on to whatever application of your choice. These rails are permanently bolted down and contain the spring-loaded quick-release pins used for attaching and removing skids.
-
Small Welding Skid With 2 Regulators
$4,100.00SHIPPING NOT INCLUDED IN PRICE FOR THIS ITEM — Call for price with shipping, or we will contact you with current freight shipping rates after purchase.
This is our smallest welding skid with Victor Edge Series 2.0 (Oxy & Acetylene) regulator gauge pack, post for 4 reels, (1) dual standing bottle post and truck mount rails. (Reels sold separately).
This skid will hold 4 reels of your choice.
This skid can be relocated as a single unit within 1 minute of pulling 2 spring-loaded locking pins and removing with a forklift or by the 4 “D” rings located in each corner.
This Skid will hold a total of 2 bottles (vertical standing).
This skid is designed to be small and compact making it ideal for small farm trucks, sprinter vans or even the CanAm Defender 6×6 UTV. Let your imagination drive.
WEIGHT
- 200 lbs
Welding Machine Mounting Surface Size:
- 44″ Long x 23″ Wide
Outside of Skid Size:
- 44″ Wide x 54″ Long x 34″ High at top of the bottle rack post.
SUITABLE WELDERS
It is important you verify the dimensions of the machine you plan to mount to insure it will fit within the “Welding Machine Mounting Surface Size”.
Here are a few current machines that will fit:
- Miller Bobcat 230, 265
- Lincoln Ranger 225, 250, 305
- Lincoln Ranger 260mpx, 330mpx
This product requires assembly prior to installation.
** If mounting this skid into a factory pickup bed, this product requires an “underbody 5th wheel hitch prep kit” from Curt Mfg (not provided or sold by AlumaReel).
Please visit Curt Hitch Kits, Select your vehicle and click on “Custom under bed 5th wheel brackets”.
-
Medium Welding Skid With 2 Regulators
$6,940.00SHIPPING NOT INCLUDED IN PRICE FOR THIS ITEM — Call for price with shipping, or we will contact you with current freight shipping rates after purchase.
Medium skid with roll-out platform, (2) Victor Edge Series 2.0 gauges, post for 6 reels, (2) standing bottle post and truck mount rails.
This skid will hold 6 reels of your choice. (Reels sold separately).
This skid can be relocated as a single unit within 1 min of pulling 2 spring-loaded locking pins and removing with a forklift or by the 4 “D” rings located in each corner.
This Skid will hold a total of 6 bottles. 4 vertical standing bottles (2 size K or 300’s and (2) large propane tanks) and 2 horizontal bottles (size K or 300’s) under the welder.
Tool cab assembly kit is sold separately and is required for toolbox applications.
This skid is designed for a 6’06” I.D. bed but will fit in an 8′ bed and or Flatbed application.
WEIGHT
- 500 lbs
ROLLOUT LENGTH
- 32″ rollout
- spring-loaded locking mechanism every 6″
Welding Machine Mounting Surface Size:
- 53″ Long x 24″ Wide
Outside of Skid Size:
- 44″ Wide x 62″ Long x 48″ High to top of the post.
SUITABLE WELDERS
It is important you verify the dimensions of the machine you plan to mount to insure it will fit within the “Welding Machine Mounting Surface Size”.
Here are a few current machines that will fit:
- This skid will basically hold all your gas engine machines (with exception of the old school SA models) and it will hold some of the newer smaller footprinted diesel machines.
- Most Miller Trailblazer’s
- All Lincoln Bobcats
- All Lincoln Ranger’s
- Lincoln Maverick 325X
- Miller Trailblazer 302 Air Pak (hangs over rear of skid by 8″)
This product requires assembly prior to installation.
** If mounting this skid into a factory pickup bed, this product requires an “underbody 5th wheel hitch prep kit” from Curt Mfg (not provided or sold by AlumaReel).
Please visit Curt Hitch Kits, Select your vehicle and click on “Custom under bed 5th wheel brackets”.
-
CAT Welding Skid With 2 Regulators
$5,100.00SHIPPING NOT INCLUDED IN PRICE FOR THIS ITEM — Call for price with shipping, or we will contact you with current freight shipping rates after purchase.
This is our CAT welding skid with Victor Edge Series 2.0 (Oxy & Acetylene) regulator gauge pack, post for 6 reels, (1) dual standing bottle post and truck mount rails. (Reels sold separately).
This skid will hold 6 reels of your choice.
This skid can be relocated as a single unit within 1 minute of pulling 2 spring-loaded locking pins and removing with a forklift or by the 4 “D” rings located in each corner.
This skid is designed for an 8′ bed but can easily be placed on a flatbed application.
WEIGHT
- 500 lbs
Welding Machine Mounting Surface Size:
- 76″ Long x 32″ Wide
Outside of Skid Size:
- 44″ Wide x 82″ Long x 46″ High to top of the post, (add 8″ to width for bottle rest on the bottle rack)
SUITABLE WELDERS
It is important you verify the dimensions of the machine you plan to mount to insure it will fit within the “Welding Machine Mounting Surface Size”.
Here are a few current machines that will fit:
- ANY Miller Machine
- ANY Lincoln Machine
This product requires assembly prior to installation.
** If mounting this skid into a factory pickup bed, this product requires an “underbody 5th wheel hitch prep kit” from Curt Mfg (not provided or sold by AlumaReel).
Please visit Curt Hitch Kits, Select your vehicle and click on “Custom under bed 5th wheel brackets”.
-
Large Welding Skid With 2 Regulators
$7,790.00SHIPPING NOT INCLUDED IN PRICE FOR THIS ITEM — Call for price with shipping, or we will contact you with current freight shipping rates after purchase.
This is our large welding skid with Victor Edge Series 2.0 (Oxy & Acetylene) regulator gauge pack, post for 6 reels, (2) dual standing bottle post and truck mount rails. (Reels sold separately).
This skid will hold 6 reels of your choice.
This skid can be relocated as a single unit within 1 minute of pulling 2 spring-loaded locking pins and removing with a forklift or by the 4 “D” rings located in each corner.
This Skid will hold a total of 6 bottles. 4 vertical standing bottles (2 size K or 300’s and (2) large propane tanks) and 2 horizontal bottles (size K or 300’s) under the welder.
Tool cab assembly kit is sold separately and is required for toolbox applications.
Ideally, this skid is used in an 8’00” bed with the 60L toolbox set up.
This skid is designed for an 8′ bed but can easily be placed on a flatbed application.
WEIGHT
- 620 lbs
ROLLOUT LENGTH
- 32″ rollout
- spring-loaded locking mechanism every 6″
Welding Machine Mounting Surface Size:
- 61″ Long x 30″ Wide
Outside of Skid Size:
- 44″ Wide x 75″ Long x 48″ High to top of the post, (53″ wide at the edge of the bottle rest on the bottle rack)
SUITABLE WELDERS
It is important you verify the dimensions of the machine you plan to mount to insure it will fit within the “Welding Machine Mounting Surface Size”.
Here are a few current machines that will fit:
- Miller Big Blue 400 & 450
- Lincoln Vantage 322
- Lincoln Frontier’s
- Lincoln Cross Country
- Lincoln Dual Maverick
- Lincoln SAE-300mp
- Lincoln Classic 300
- Lincoln Vantage 300/400
- Lincoln Big Red 500
- Lincoln Ranger 305 G/D
- Miller Big Blue Pro 300
- Miller Trailblazer 302 Air Pak
- Miller Bobcat Series
This product requires assembly prior to installation.
** If mounting this skid into a factory pickup bed, this product requires an “underbody 5th wheel hitch prep kit” from Curt Mfg (not provided or sold by AlumaReel).
Please visit Curt Hitch Kits, Select your vehicle and click on “Custom under bed 5th wheel brackets”.
AlumaReel USA welding skids bolt directly into any pick-up truck in your fleet, and within one minute can be removed using the “quick release” feature.